Fully Enclosed Type Substation Field Use Vacuum Dielectric Oil Purification Machine 6000 Liters/Hour
Old transformer oil solutions:
Used insulating oil, old transformer oil and aging insulation oil is generally mixed with gas, water and particles, and other contaminants. The content of the contaminants generally increases with time. In the oil treatment by our oil purification plants, these associated gases, water and contaminants are separated and removed from the oil. In transformer applications, it is critical that the transformer oil can not contain too much of these substances. So our oil filtration equipment can solve this problem to make the oil clean and reusable, then final oil treated by our oil filtration system can be used into these electrical devices again.
How to treat Transformer oil?
The series ZYD double-stage vacuum Transformer oil regeneration plant is used in electric power department and industries to deal with various oils such as transformer oil, mutual oil, switch oil and so on.
1, Remove water from transformer oil, such as free water, trace water and so on by the double stage vacuum system. And this oil filter can eliminate water content from oil completely.
2, Remove gas, air content from the old transformer oil by vacuum degassing system.
3. Remove impurities, tiny particles, acidity, sludge, free carbon, other soluble oil decay products and discoloration substances by 3 filters (Primary filter, secondary filter, fine filter).
4. Independent vacuum oiling system for transformers, this oil purifier can also vacuum dry transformer and on-line operation with transformers.
5. It is mainly used for purifying the insulating oil, transformer oil, mutual oil, switch oil, dielectric oil and so on. The standard ZYD oil filtration system is designed for processing oils in workshops, in storage tanks or directly in transformers (energized or de-energized transformers).
oil filtration, oil processing, oil filter, oil purifier, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil water separator, oil purification, oil reclamation, oil dehydration, oil demulsifier, oil flushing, oil flush, degasification
Technical Parameters:
| Parameters | Unit | ZYD-30 | ZYD-50 | ZYD-100 | ZYD-150 | ZYD-200 | ZYD-250 | ZYD-300 |
| Flow Rate | L/H | 1800 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 |
| Working Vacuum | Mpa | -0.08 ～-0.099 |
| Working Pressure | Mpa | ≤ 0.3 |
| Temp Range | ℃ | 20 ～80 |
| Power Supply | | 380V, 50Hz, 3Phase( As per required) |
| Working Noise | Db | 60 - 80 (Depended on the configuation) |
| Heating Power | KW | 30 | 60 | 90 | 135 | 150 | 165 | 180 |
| Total Power | KW | 35 | 67.5 | 101.5 | 149 | 164 | | 198 |
| Inlet/Outlet Diam | MM | 25 | 32 | 42 | 50 | 50 | 60 | 60 |
| Weight | KG | 450 | 550 | 750 | 950 | 1200 | 1850 | 2000 |
| Size | Length | MM | 1450 | 1450 | 1750 | 1850 | 1950 | 2050 | 2150 |
| Width | MM | 950 | 1000 | 1250 | 1300 | 1350 | 1400 | 1450 |
| Height | MM | 1700 | 1750 | 1950 | 2000 | 2050 | 2100 | 2150 |
| AFTER TREATMENT |
| Dielectric Strength | KV | ≥ 75-85 |
| Water Content | PPM | ≤ 3 |
| Gas Content | % | ≤ 0.1 |
| Particle Size | μ | ≤ 3 |
| Cleanliness ≤NAS 1638 Grade 5 |
Application:
The ZYD transformer oil purifier can remove the water, gas and impurities in insulation oil high-efficiently, increasing the pressure force and quality of oil, make sure the electric device running safely. The machine is mainly used for electric power department and industries to deal with various oils such as transformer oil, mutual oil, switch oil and so on. The machine is especially for purifying the insulation oil in all kinds of large power equipments that are above 110KV, especially for the altitude is over 500 meters.
Feature:
1. High vacuum limiting vacuum less than 5pa, working vacuum less than 35pa.
2. High absorption speed, absorption speed power more than 333L/Sr.
3. Duplex 3D stereo-evaporation technology, eliminating the liquid water very effectively.
4. UK G technology by which the trace water that is show chain, such
as dissolved water, can be removed effectively.
5. Distinctive removing impurities technology filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.
6.Especially applied to vacuum oiling and drying for power transmission equipments that are over 110kv.
7.Can be operated both on-load and off load.
8. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after treatment.
9.can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state.
10.The machine adopts the double-infrared liquid automatic controller, sensitive automatic pressure protector and the high effective equipment for degas, so it is easy to operate.
Advantage:
Comparing with the single-stage vacuum oil purifier, this machine dewater, degas and removes the impurities more quickly, more completely, and makes the oils limiting voltage-withstand value much higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices.
Product Tags:
|
|
High Absorption Speed Transformer Oil Processing Equipment High Efficiency Images
|
